Mitel 5212 - Transfer to Voice Mail from the 5212 Ip Phone

74 Using the phone system
Final
1 While on an active call, press the key. The system places the
call on hold, and the LCD screen displays:
2 Enter the extension or phone number of the person to whom you wish to
transfer, or press a One-Touch Speed Dial button.
3 Press the key once you hear ringing. The LCD screen displays
the message "Transfer Complete" for approximately five seconds before
returning to an idle state.
Instead of pressing the key immediately you can wait until the
destination answers and then press the key.
If you enter an invalid extension during a transfer, the LCD screen displays
"Invalid Extension". To reconnect with the caller, follow these steps:
1 Press the key.
2 Press the flashing Line Appearance key.
3 Try to transfer the call again.
If you choose not to complete the transfer, press the key, then
press the flashing Line Appearance key to retrieve the original call.
Transfer to voice mail from the 5212 IP phone
If your administrator has configured an auto attendant for voice mail deposit,
you can transfer a caller directly to a co-worker's voice mail box.
To transfer a call to voice mail, follow these steps:
1 While on an active call, press the key. The system places the
call on hold, and the LCD screen displays:
2 Enter the extension of the auto attendant that your administrator has
created for voice mail deposit.
Transfer To:
Transfer To: 415
Transfer To: