Using the phone system 63Final
3 Press the Incoming Calls List key to exit from the call list.
To call a number from your incoming calls list:
1 Press the Incoming Calls List programmed key. The most recent call
that you received is displayed:
2 Use the keys to navigate the list.
3 Press the key to make a call to the displayed number.
If you are on-hook, the next available Line Appearance is selected and
the speakerphone is activated. The system will attempt to dial the
displayed number by prefixing it with the appropriate digits for external
dialing (usually "9" or "91" depending on configuration). If the number can
be dialed as such, you will hear ringing once the call has been placed. If
the number cannot be dialed as such, the call will fail and you will have to
dial the number manually remembering to include the proper prefix digits.
The position of the call in the call list is displayed in front of the phone
number.
The * symbol beside the position of the call means that the call was not
answered.
Redial on the 5212 IP phone
Using the key, you can view a list of calls that were made and also
redial a number in that list without using the keypad. The maximum amount
of numbers in your redial list is typically ten but is dependent on your service
provider.
To use Redial, follow these steps:
1 Press the key.
The number that you most recently dialed is displayed:
2 Use the Arrow keys to navigate the list (if required).
3 Once the required number is displayed, press the key to make
the call. The next available Line Appearance is selected and you will hear
ringing once the number has been dialed.
1: 754-4536
*1: 9-605-223-7865
To Next Page
Loading...
