Mitel 5212 - Page 71

66 Using the phone system
Final
To use this feature, you must have a key programmed with Forward to
Coverage.
If you have this feature turned on when you log out of your phone all your
calls will be forwarded to coverage.
Forward your 5212 IP phone to number
Using Forward to Number, you can send all incoming calls to a preset phone
number. Press the Forward to Number key once to turn the feature on. Press
the key a second time to turn the feature off. The LED on the programmed key
indicates when the phone is being forwarded.
To use this feature, you must have a key programmed with Forward to
Number.
If you forward your phone to an external phone number, you must have
permission to make that external call and Redirect Inbound Call to
External Number permission. For instructions about how to view your call
permissions, see “Permissions” on page 99.
If you have this feature turned on when you log out of your phone, all your
calls will be forwarded to the number defined.
Forward your 5212 IP phone to prompt
Using Forward to Prompt, you can send all incoming calls to a phone number
that you have entered via your phone. The LED on the programmed key
indicates when the phone is being forwarded.
To forward to prompt, follow these steps:
1 Press the Forward to Prompt key on your phone. The system will ask
you to enter a phone number.
2 Enter the phone number on the phone keypad.
3 Press the # key on the keypad.
To change the phone number for the forward to prompt, repeat the above
three steps.
To turn forward to prompt off, follow these steps:
1 Press the Forward to Prompt key.
2 Press the # key on the keypad.
To use this feature, you must have a key programmed with Forward to
Prompt.