Mitel 5613 DECT Phone User Manual for MiVB
LED Indications during Easy Replacement
The following table shows the LED indications that is used by the charger during the easy
replacement procedure. See also Chapter 7 Troubleshooting on page 63.
ake a couple of minutes before the handset automatically registers with the system.
8 When the text "Phone successfully replaced. Please remove phone to restart." appears
in the display, remove the handset from the charger. The handset is automatically
restarted.
LED INDICATION DESCRIPTION
Orange, flashing (1 000 ms on, 1 000 ms
off)
File transfer during Easy Replacement.
Orange, flashing (100 ms on, 800 ms off) “Change phone” indication during Easy
Replacement.
Red, flashing (100 ms on, 800 ms off) Error indication during Easy Replacement. Put back
new portable in charger.
Red, flashing (900 ms on, 100 ms off) Error during Easy Replacement. Service needed for
both portables.