How to fix Mitsubishi Electric Industrial Electrical error H0246?
If your Mitsubishi Electric Industrial Electrical displays error H0246, it means the safety communication (CC-Link IE TSN) function is not supported by this robot. To resolve this, disable the safety communication function.
General| Brand | Mitsubishi Electric |
|---|---|
| Model | CR800 Series |
| Category | Controller |
| Language | English |
Prepare a device for immediate operation stoppage during teaching.
Install a fence or enclosure to prevent operator contact with the robot.
Inspect the robot, E-stop, and related devices for errors before starting work.
Securely install hand/tool and grasp workpiece to prevent damage.
Securely ground the robot and controller to prevent noise or shock.
Secure priority for robot control during teaching to prevent injury.
Ensure safety fence entrance doors have interlocks or automatic stops.
Keep hands clear of openings when moving the robot arm manually.
Do not turn off main power during automatic operation to maintain accuracy.
Do not turn off main power during program/parameter rewrite to prevent data damage.
Maintain system security against cyberattacks using firewalls and antivirus.
Details how to adjust the robot's movement speed during JOG operation.
Explains how to select different JOG operation modes (JOINT, XYZ, TOOL, etc.).
Details how to perform JOG operations using the JOINT mode.
Details how to perform JOG operations using the XYZ mode.
Details how to perform JOG operations using the TOOL mode.
Details how to perform JOG operations using the 3-axis XYZ mode.
Details how to perform JOG operations using the Cylinder mode.
Details how to perform JOG operations using the Work coordinate system.
Details how to use the force control feature.
Explains how to enable/disable collision avoidance.
Steps to open a new program editing screen.
Describes the command editing screen interface.
Steps to open and edit an existing program.
Details the process of saving a program to the robot controller.
Details the process of saving a program to USB memory.
Guides on how to add new lines of code to a program.
Details how to delete lines of code from a program.
Describes how to cut, copy, and paste lines of code.
Explains how to search for character strings within a program.
Details how to replace character strings in a program.
Guides on how to jump to specific lines or labels in a program.
Steps to register the robot's current position as a variable.
Explains how to directly input numerical values for position data.
Instructions for initiating the step operation for debugging.
Explains how to execute programs line by line for debugging.
Details how to set and remove breakpoints for debugging.
How to access and start the Backup/Restore utility.
Steps to back up robot data to USB memory.
Steps to restore robot data from USB memory.
Displays currently occurring and historical errors.
Explains setting the robot's origin for high accuracy.
Details the process of inputting origin data.
Explains the password setup for accessing controller functions.
Guides on registering a new password.
Details how to change an existing password.
Explains how to delete the password.
How to access and start the parameter editor.
Guides on modifying parameter values.
Restricts access to R56 TB screens based on user levels.
Allows editing user levels and passwords.
Guides on switching between different user levels.
Describes the process of updating the T/B software.
How to access and edit user-defined screens.
Guides on creating and configuring buttons for user-defined screens.
Guides on creating and configuring lamps for user-defined screens.
Explains how to display variable values on user-defined screens.
Shows the current program execution line on user-defined screens.
Shows the name of the program currently being executed.
Shows the current execution line number of the program.
Displays current robot position in XYZ coordinate system.
Displays current robot position in joint coordinate system.
Sets and displays messages based on I/O signal states.
How to display and access the user-defined screen.
How to access and start the operation panel screen.
Monitors slot status, operation mode, temperature, and override.
Allows selecting robot programs to run from the operation panel.
Adjusts the robot's override speed using UP/DOWN buttons.
Controls the robot's servo power.
Starts the automatic operation of the robot.
Stops the robot's running program and movement.
Resets controller errors and the program's halted state.
Stops the program after completing the current cycle.
To Next Page
