Radio Programming and Tuning: Front Panel Programming 5-17
PROG BTN
(Programmable
Button)
SIDE 1S
(Side Button 1
– Short Press
UNASSIGN (Unassigned)
BCKLIGHT (Backlight)
CH ALIAS (Channel Alias)
PTT ID (PTT ID Enable)
TPL/DPL (TPL/DPL Enable)
PRIME CH (Prime Channel)
POWER (Power Level)
SCAN
SQUELCH (Squelch Level)
TALKARND (Talkaround)
MONITOR
PHONE (Phone Mode)
SCM CODE (Scrambling
Code Select)
VOX (Voice Operated
Transmit)
RV BURST (Reverse Burst)
SEL CALL (Selective Call)
CL ALERT (Call Alert)
Program Side Button 1 – Short Press.
SIDE 1L
(Side Button 1
– Long Press)
UNASSIGN (Unassigned)
BCKLIGHT (Backlight)
CH ALIAS (Channel Alias)
KEY LOCK (Keypad Lock)
NUIS DEL (Nuisance
Channel Delete)
PTT ID (PTT ID Enable)
TPL/DPL (TPL/DPL Enable)
PRIME CH (Prime Channel)
POWER (Power Level)
SCAN
SQUELCH (Squelch Level)
TALKARND (Talkaround)
STKY MONITOR (Sticky
Monitor)
PHONE (Phone Mode)
SCRAMBLE (Scrambling
Enable)
SCM CODE (Scrambling
Code Select)
VOX (Voice Operated
Transmit)
RV BURST (Reverse Burst)
SEL CALL (Selective Call)
CL ALERT (Call Alert)
VOL SET (Volume Set)
Program Side Button 1 – Long Press.
SIDE 2S
(Side Button 2
– Short Press)
- same as above - Program Side Button 2 – Short Press.
SIDE 2L
(Side Button 2
– Long Press)
- same as above - Program Side Button 2 – Long Press.
FRONT 1S
(Front Button 1
– Short Press)
- same as above - Program Front Button 1 – Short Press.
Table 5-9. Front Panel Programming Mode Parameters (Continued)
Main Menu
1st Level
Sub-Menu
2nd Level
Sub-Menu
Setting Remarks