Motorola EP350

5-22 Radio Programming and Tuning: Front Panel Programming
PHONE
*
ACC CODE
(Access Code)
XXXXXXXX Access code for phone – XXXXXXXX.
Use radio keypad to enter up to 16 characters
consisting of 0,1,2,3,4,5,6,7,8,9,#,*
DEACCCODE
(Deaccess
Code)
XXXXXXXX Deaccess code for phone – XXXXXXXX.
Use radio keypad to enter up to 16 characters
consisting of 0,1,2,3,4,5,6,7,8,9,#,*
PHONE 01 NUMBER01 Set Phone No 1.
Use radio keypad to enter up to16 characters
consisting of 0,1,2,3,4,5,6,7,8,9,#,*
Note: NUMBER01 will appear if the phone list
entry is empty.
NAME 01 Set alias for Phone No 1.
User can use radio keypad to enter up to 8
characters consisting of A – Z, 0 – 9, \, #, < >, *, +,
_, /, -
Note: NAME 01 will appear if the phone list entry
is empty.
ALIAS
(Assigned
name
EDIT Edit phone number – XXXXXXXX.
Note: The alias will appear at 1st menu level if the
phone list entry is not empty.
DELETE Delete the phone entry.
PHONE XX
(XX = 01 to 16)
NUMBERXX Set Phone No X.
User can use radio keypad to enter up to16
characters consisting of 0,1,2,3,4,5,6,7,8,9,#,*
Note: NUMBERXX will appear if the phone list
entry is empty.
NAMEXX Set alias for Phone No X.
User can use radio keypad to enter up to 8
characters consisting of A – Z, 0 – 9, \, #, < >, *, +,
_, /, -
Note: NAMEXX will appear if the phone list entry
is empty.
CALL LST
*
(Call List
ALIAS EDIT XXXXXXXX Allows you to edit call ID. XXXXXXXX denotes
the
call ID numbers.
Note: The alias will appear at 1st menu level if the
call list entry is not empty.
DELETE Selecting DELETE option will delete the call list
entry.
CALL XX
(XX= 01 to 16)
ID XX Set call list ID X.
Use radio keypad to enter up to 8 characters
consisting of 0,1,2,3,4,5,6,7,8,9,#,*
Note: ID XX will appear if the call list entry is
empty.
ALIAS XX Set alias for call list ID X.
Use radio keypad to enter up to 8 characters
consisting of A - Z, 0 - 9, \, #, < >, *, +, _, /, -
Note: Alias XX will appear if the call list entry is
empty.
*
Applicable to Keypad Models only.
**
Only applicable to radio that supports Dealer Mode.
Table 5-9. Front Panel Programming Mode Parameters (Continued)
Main Menu
1st Level
Sub-Menu
2nd Level
Sub-Menu
Setting Remarks