MTS Systems FlexTest SE Service Information

Model 493.02 Controller Service
Hydraulic Configurations
222
Single 493 Chassis with a 24 V PLC pump (506.52-.92) or 505 pump
Note The following three configurations have cables to support both 24 V
DC and 115 V AC control voltages. A 493.07 HPU Converter Box is
available for each voltage (not both). Be sure the cables and HPU
Converter box are rated for the same voltage.
Single 493 Chassis with a non-PLC pump
Multiple 493 Chassis and 407 Controllers
J25
HPS
397137-XX
493.02
Chassis
HPU
J25
HPS
397138-XX (24 V DC)
397146-XX (115 V AC)
HPU
J25
HPS
397107-XX (24 V DC)
397108-XX (115 V AC)
493.07
HPU Converter
Box
J1
HPS
493.02
Chassis
J25
HPS
HPU
J25
HPS
397107-xx (24 V DC)
397108-xx (115 V AC)
493.07
HPU
Converter
J1
HPS
J25
HPS
J25
HPS
OR
501822-XX
519958-XX (CE)
407 Controller
low level Y cable 397135-01
397138-XX (24 V DC)
397146-XX (115 V AC)
493.02
Chassis
493.02
Chassis

MTS Systems FlexTest SE Specifications

General

Brand	MTS Systems
Model	FlexTest SE
Category	Controller
Language	English