Safety
Safety devices
10.06.2014 25
DANGER
Dangerous voltage!
Turning off the machine with the main switch does not rid it of elec-
trical current.
Touching electrically charged components can cause serious or
even fatal injuries.
¾ Only qualified electricians are permitted to work on electrically
charged components.
Before beginning any work on electrically charged components:
¾ Switch off the main switch and attach a lock to prevent unau-
thorised start-up.
¾ Disconnect the machine's power supply from the mains electric-
ity.
1.9.2 Safety devices
Safety devices cover the danger zones lying beneath them. Depend-
ing on the equipment of the machine, various safety devices are used,
e.g. side panels, doors, protective plates, etc.
WARNING
Injury hazard!
Missing protective devices result in unprotected danger zones.
Reaching into unprotected danger zones can lead to serious or
even fatal injuries.
¾ Do NOT put the machine into operation without protective de-
vices.
¾ Check that all protective devices are attached and in a techni-
cally flawless condition.
¾ Check that all protective devices are completely closed without
gaps.
1.10 Machine labels
Safety and information labels have been attached to the machine.
• Do NOT remove these labels.
• Make sure all labels are intact and legible.
• If necessary, clean the labels with soap and water.
– Do NOT clean the labels with solvents.
• Replace damaged, scratched or illegible labels with new ones.
Info
Labels can be obtained from the manufacturer.
To Next Page
Loading...
