multivac C300 - Entire Machine - Perform Intermediate Disinfection; Entire Machine - Alkaline Cleaning and Disinfection; Entire Machine - Perform a Wipe Test; Entire Machine - Acidic Cleaning and Disinfection

Maintenance
Maintenance recommendation
10.06.2014 93
7.2.2 Entire machine - Perform intermediate disinfection
¾ Perform intermediate disinfection regularly during operation (e.g.
before or immediately after short breaks), see Section 6 "CLEAN-
ING".
7.2.3 Entire machine - Alkaline cleaning and disinfection
¾ See company cleaning guidelines.
¾ See the cleaning measures specified by the manufacturer, see
Section 6 "CLEANING".
7.2.4 Entire machine - Perform a wipe test
¾ Check the result of the cleaning and disinfection by means of a
wipe test.
See the company cleaning guidelines and recommendations, see
Section 6 "CLEANING".
7.2.5 Entire machine - Acidic cleaning and disinfection
¾ See company cleaning guidelines.
¾ See the cleaning measures specified by the manufacturer, see
Section 6 "CLEANING".
7.2.6 Entire machine - Intensive cleaning
¾ See company cleaning guidelines.
¾ Check the components described in Intensive Cleaning for con-
tamination.
¾ If there is any contamination perform intensive cleaning, see
Section 6 "CLEANING".
7.2.7 Chamber lid viewing window - Visual inspection
¾ Check the viewing window in the chamber lid for damage (e.g
scratches, cracks).
¾ If the viewing window in the chamber lid is damaged have it re-
placed immediately by the manufacturer.
7.2.8 Chamber lid gasket - Visual inspection
¾ Check chamber lid gasket for damage.