multivac C300 - Setting the MHP Process; Setting the MPP Process

Operation
Select and set process
62 10.06.2014
¾ Select MCV process.
¾ Set MCV threshold.
¾ Set MCV duration.
¾ Call up the "gas flushing" menu (Optional).
¾ Switch off Gas flushing On/Off.
¾ Call up the "sealing" menu.
¾ Switch off Sealing On/Off.
4.9.3 Setting the MHP process
¾ Press <Evacuation> key briefly and enter value for Evacuation
pressure.
¾ For automatic evacuation, decrease the value until Automatic
appears.
– The machine controls the evacuation process automatically.
¾ Press <Evacuation> key briefly again and set value for Post-
evacuation time.
¾ Call up the "evacuation" menu.
¾ Set Distribution time.
¾ Set Automatic.
¾ Select MHP process.
¾ Set MHP evacuation time.
¾ Set MHP Evacuation pause.
¾ Call up the "gas flushing" menu (Optional).
¾ Switch on On/off gas flushing.
¾ Set Distribution time.
¾ Set Rinse time.
¾ Press <Gas flushing> key briefly and set value for Gas flushing
pressure.
4.9.4 Setting the MPP process
¾ Call up the "gas flushing" menu.
¾ Switch on On/off gas flushing.
¾ Call up the "evacuation" menu.
¾ Select MPP process.
¾ Call up the MPP submenu.