multivac C300 - Display Hours of Operation; Display Cycle Time; Show Settings; Setting the Brightness of the Display

Operation
Display production data
10.06.2014 65
4.13.2 Display hours of operation
Display machine's
hours of operation
¾ Call up the "Operating data" menu.
¾ Call up "Hours of operation" menu.
¾ Select Hours of operation.
Display vacuum pump's
hours of operation
¾ Call up the "Operating data" menu.
¾ Call up "Hours of operation" menu.
¾ Select Vacuum pump.
4.13.3 Display cycle time
¾ Call up the "operating data" menu.
¾ Select the "Cycle time" menu.
– A list of cycle times is displayed.
4.13.4 Show settings
¾ To view the settings of recipes 7 through 30, load the desired rec-
ipe via the menu, see Section 4.8.1 "LOAD RECIPE ".
¾ Call up the "production data" menu.
¾ Select Settings .
– The settings of the loaded recipe appear in a list.
Info
The settings of recipes 1 through 6 can be speed dialed from the
list. To do so, load the respective recipe with the keys <1> through
<6>.
4.14 Setting the brightness of the display
¾ Call up "User" menu.
¾ Select brightness.
¾ Using the <arrow> keys set the desired brightness.