EasyManua.ls Logo

multivac C300 - Machine Cleaning Methods

multivac C300
140 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaning
Cleaning the machine
74 10.06.2014
6.2 Cleaning the machine
Info
The recommended daily cleaning tasks recommended here must
be supplemented by the intensive cleaning procedure according
to the degree of dirt.
Cleaning personnel must be instructed for the cleaning work by
the operating company.
The sequence of the described tasks is to be followed exactly.
6.2.1 Cleaning procedure
The manufacturer recommends the following cleaning procedures:
Low pressure cleaning
• Manual cleaning
Low pressure disinfection
• Quick disinfection
• Dry cleaning.
Info
The procedure which is to be performed is noted in the respective
step in the cleaning instructions.
Low pressure cleaning
Info
The company cleaning guidelines specify which cleanser (alkaline
or acidic) is to be used.
¾ Perform the low-pressure foaming procedure to apply the
cleanser.
¾ Wait until the contact time has elapsed (see instructions of
cleanser manufacturer).
¾ If necessary, remove stubborn dirt and stains with a soft brush.
¾ Rinse off with water of drinking quality.
¾ Inspect for dirt and cleanser residues.
¾ If necessary, clean and rinse again.
Manual cleaning
Info
The company cleaning guidelines specify which cleanser (alkaline
or acidic) is to be used.

Table of Contents

Related product manuals