multivac C300 - Filling the Vacuum Pump with Oil

Start-up
Initial start-up
10.06.2014 47
3.2.2 Filling the vacuum pump with oil.
Checking the oil level
¾ Switch off the machine.
¾ Disconnect the machine from the mains electricity.
WARNING
Burn hazard!
The surface of the vacuum pump can reach temperatures of over
70 °C during operation.
Touching the vacuum pump can lead to burns.
Before performing any work on the vacuum pump:
¾ Allow the vacuum pump to cool down.
¾ Wear personal protective equipment.
¾ With an internal vacuum pump remove the safety guard.