Description
Process sequence
40 10.06.2014
Sealing
• Compressed air is admitted to the sealing
diaphragm. The sealing diaphragm ex-
pands, pressing the sealing bar against the
counter-pressure bar.
• The film pouch is sealed.
• The sealing bar and seal seam cool off.
• The sealing diaphragm is ventilated, the
sealing diaphragm slackens.
• The chamber is ventilated.
• The chamber lid opens automatically if it is
not locked.
2.7 Packaging process
The following processes are available for packing products.
Processes Example of use
Standard Technical products or products without special
requirements.
MCV Testing airtightness of packs or for drying prod-
ucts.
MHP Gentle evacuation of sensitive products with nu-
merous air pockets.
MPP Laboratory use.
MRP (Optional) Reduction of residual oxygen content.
2.8 Preset recipes
Recipes 1 to 6 are preset at the factory. The settings depend on the
machine equipment.
Info
Recipes 1 to 6 contain presettings which have to be adjusted to the
individual cases.
Recipe Example of
use
Evacuation
pressure
Automatic
sensitivity
Gas flush-
ing pres-
sure
Sealing
time
MHP
No. 1 For dry
products
without gas
flushing.
Automatic 4 Off 1.8 s Off
To Next Page
Loading...
