Important information on the manual
Symbols used
10.06.2014 9
Instructions to follow are displayed in the following form:
¾ Press key A.
¾ Release screw B.
¾ Press key C.
• Enumerated items are marked with bullet points.
– Dashes are used to mark sub-items of enumerated lists or se-
quences of steps to be taken.
Manual layout
• Chapter 1 "Safety":
Generally valid safety instructions are to be observed.
• Chapter 2 "Description":
Description of the main assemblies, functions in the display and
technical data.
• Chapter 3 "Start-up":
Notes on starting up and making connections.
• Chapter 4 "Operation":
Information on using the machine.
• Chapter 5 "Adjustment work and setup ":
Notes regarding adjustment and setup.
• Chapter 6 "Cleaning":
Instructions for cleaning and information on care products.
• Chapter 7 "Maintenance":
Maintenance table and instructions for maintenance.
• Chapter 8 "Troubleshooting":
Contains information on how to recognise the causes of malfunc-
tions and troubleshoot them.
• Chapter 9 "Shutdown, transport, storage":
Instructions for shutting down, transporting and storing the ma-
chine.
• Chapter 10 "Disposal":
Notes regarding disposal of the machine.
• Chapter 11 "Spare parts":
Machine wearing parts and spare parts.
To Next Page
Loading...
