Cleaning
Cleaning the machine
10.06.2014 89
¾ Clean the cleaning devices (e.g. rubber wipers, brushes).
¾ Place cleaning devices in disinfectant solution.
¾ Unpack the film pouches and lay them ready.
¾ Switch on the machine.
¾ Close and press down the chamber lid. Observe the pressure
shown in the display.
– The pressure drops: the chamber is airtight.
– The pressure does not drop: the chamber is not airtight.
¾ If the chamber is not airtight, check the chamber lid gasket:
¾ Smooth out chamber lid gasket.
¾ Perform quick disinfection of the chamber lid gasket.
6.3 Care products table
Recommended care products:
Type Manufacturer Designation
Ecolab Europa P3-topax 12
Ecolab USA Quorum Pink II
Shureclean VK10 Diversey Europe
JD Shureclean Plus VK9
Shureclean VK10
Cleansers, neutral
Diversey USA
JD Shureclean Plus VK9
Ecolab Europa P3-topactive LA
JD Ultraclean VK3 Diversey Europe
Diverfoam SMS HD VF22
JD Ultraclean VK3
Cleansers, alkaline
Diversey USA
Diverfoam SMS HD VF22
Diversey Europe Cleansers (CIP cleaning),
alkaline
Diversey USA
Supergel VG3
P3-topax 52 Ecolab Europa
P3-topax 56
Quorum Red Ecolab USA
Foam shine
Cleansers, acidic
Diversey Europe JD Acifoam VF10
To Next Page
Loading...
