Cleaning
Cleaning the machine
88 10.06.2014
¾ Smooth out chamber lid gasket.
¾ Attach or install the following components:
– Sealing bar.
– Filling plate.
– Sloping insert with with support angle.
¾ Open all stop-cocks in the supply lines.
¾ Connect the machine to the mains electricity.
¾ If the external vacuum pump has its own power supply, have the
external vacuum pump connected to the mains electricity by a
qualified electrician.
¾ Perform quick disinfection of the whole loading area.
To Next Page
Loading...
