Cleaning
Cleaning the machine
10.06.2014 87
¾ Perform quick disinfection of the inside of the housing.
¾ Do not spray directly onto cables, contacts and electrical com-
ponents.
¾ Fasten the safety guard.
Disinfect the machine
and the floor
¾ Perform low pressure disinfection of the floor.
¾ Open the chamber lid.
NOTICE Danger of material damage!
Penetration by foreign matter (e.g. liquids, product residue, foreign
bodies) will damage the vacuum pump.
Damage can cause faults in the machine, which in turn can result in
reject packs.
¾ Do NOT spray directly on the covers of the suction openings in
the chamber.
¾ Perform quick disinfection of the machine.
¾ Leave the chamber lid open to dry.
Complete the cleaning
¾ Remove the plastic bag for protecting sensitive components.
¾ Remove the plastic bag from the mains plug.
¾ Dispose of plastic bags properly. For reasons of hygiene, never
reuse bags.
¾ Insert the dry chamber lid gasket in the groove of the lid.
¾ If the chamber lid gasket or groove is wet, dry with a new cloth
or sterile compressed air.
¾ During insertion, do not stretch the chamber lid gasket.
To Next Page
Loading...
