Operation
Packing products
10.06.2014 55
¾ Fill the film pouch.
¾ Insert film pouch.
– The opening of the film pouch extends 2 to 3 cm beyond the
sealing.
¾ If necessary, use filling plates.
– The pouch neck should be located at the centre of the
pouch height x.
¾ Use the sloping insert for packaging liquids, see Section 5.2
"INSERT AND REMOVE THE SLOPING INSERT ".
– Liquid cannot escape from the film pouch.
¾ Gas flushing option: Pull the pouch opening over the gas noz-
zles so that the inert gas flows into the film pouch.
To Next Page
Loading...
