1
2
3
4
Advanced Fax Functions
F-Code Communications 4-35
Enter the sub-address registered in the other machine using the numeric keys,
6
and press [Enter].
Up to 20 digits can be entered for a sub-address.•
To delete one of the entered characters, press [Clear].•
To delete all of the entered characters, press [All Clear].•
If a password is set, press the password entry box.
7
If a password is not set, proceed to step 9.
Enter the password using the numeric keys, and press [Enter].
8
Up to 20 digits can be entered for a password. Numerals, # and * can be entered.
Press [Enter].
9
Press [F-Code Tx] again to return to the screen in step 4, where you can correct the sub-
address and/or password if entered incorrectly.
Press [Close].
10
Specify the destination, and press <Start>.
11
For details on specifying the destination, refer to “Specifying Destinations”. (See
page 5-2.)
To Next Page
Loading...
Need help?
General
