1
2
3
4
5
6
Communication Management
Checking the Transmission Result (Transmission Report) 6-3
If you selected [e-mail], specify the destination for transmission report, and
6
press [Enter].
Up to 50 characters can be entered.•
To delete one of the entered characters, press [Clear].•
Press [Close] twice.
7
Specify the destination, and press <Start>.
8
For details on specifying the destination, refer to “Specifying Destinations”. (See page 5-2.)
You can change the transmission report settings while scanning. Press [Tx Report] on
the screen displayed while scanning. Continue the procedure from step 5.
To Next Page
Loading...
Need help?
General
