Description of Setup Buttons 9-19
9
[Stamp]
To display: [Scan/Fax] - [Application] - [Stamp/Composition] - [Stamp]
Texts such as "PLEASE REPLY" and "DO NOT COPY" are printed on the first page or all pages. You can
select the text to be added from the registered fix stamps and arbitrary registered stamps.
[Starting Page Number] Enter the starting page number to be printed on the first page. For exam-
ple, to print page numbers from the third page of the original, enter "-1".
The first page of the original is counted as "-1", and the second page as
"0", and the third page is counted as "1". In [Starting Page Number], a page
number is printed on pages 1 and later. If "2" is entered, page numbers are
printed from the first page of the original as "2, 3", etc. in order. The "-" (mi-
nus sign) changes to + each time you press *.
[Starting Chapter Number] Enter the starting chapter number if an original is divided into chapters, and
you want to print chapter numbers from the second chapter.
You can specify chapter numbers only when you have selected [Chapter
Page] in [Page Number Type].
[Text Details] If necessary, select the print size, font, and text color.
[Print Position] If necessary, select the print position of the text. You can adjust the print
position in [Adjust Position] more closely.
Settings Description
Settings Description
[ON]/[OFF] Select [ON] to print a stamp.
[Stamp Imprint] Select the stamp you want to print.
[Pages] Select the range of pages to print.
[Text Details] If necessary, select the print size and text color.
[Print Position] If necessary, select the print position of the text. You can adjust the print
position in [Adjust Position] more closely.
To Next Page
Loading...
Need help?
General
