How To Send a Fax 3-21
3.6 Option Settings for Fax TX
3
Specifying the original loading direction ([Original Direction])
When scanning a double-sided original etc., you can specify the direction in which the original is loaded so
that the vertical direction is set correctly.
For details, refer to page 9-14.
Specifying the binding position of the original ([Binding Position])
When scanning a double-sided original, specify the binding position of the original in [Binding Position] to
prevent the binding position from being reversed.
For details, refer to page 9-13.
Scanning while removing dust in the slit glass ([Despeckle])
When scanning an original through ADF, scanning of original and dust removal from the Slit Scan Glass are
performed alternately, so that the original is always scanned using clean Slit Scan Glass.
It takes longer to finish scanning, compared to normal operation.
For details, refer to page 9-12.
Skipping blank pages ([Blank Page Removal])
Blank pages contained in the original loaded into the ADF are skipped when the original is scanned.
For details, refer to page 9-13.
To Next Page
Loading...
Need help?
General
