Muratec MFX-C2280 Fax Guide

Sending Options 4-11
4.6 Sending a Fax after Specifying a Relay Station ([F-Code TX])
4
Operation flow
1 Load the original.
2 Tap [Scan/Fax].
3 Specify the fax number of the relay station.
4 Tap [Application] - [Fax Setting] - [F-Code TX], then tap [ON].
5 Enter the [SUB Address] and [Sender ID], then tap [OK].
% [SUB Address]: Enter the relay user box number.
% [Sender ID]: Enter the relay TX password for the relay distribution.
6 Press the Start key.
Fax transmission to the relay station begins. Faxes received by a relay station are delivered to destina-
tions registered with the relay station.

Muratec MFX-C2280 Specifications

General

Brand	Muratec
Model	MFX-C2280
Category	Copier
Language	English