Description of Setup Buttons (Administrator Settings) 11-32
11
Select whether to give priority to image or speed when printing a high res-olution received fax.
If [Prioritize Quality] is selected, an image is corrected. Note that, for a high resolution fax, image correction
is less effective relative to a low resolution fax.
[Prioritize Speed] is selected by default.
[Security Settings]
To display: [Utility] - [Administrator Settings] - [Security Settings]
Configure the security functions of this machine, such as password and data management method.
[Security Details]
To display: [Utility] - [Administrator Settings] - [Security Settings] - [Security Details]
Restricts functions that are related to authentication operations and data management to enhance security.
Settings Description
[Administrator Password] If necessary, change the administrator password of this machine.
[User Box Administrator
Setting]
If necessary, assign a user box administrator if the user authentication has
been adopted into this machine.
The user box administrator can create or delete a user box for all users as
well as use files in the boxes.
If the administrator of this machine wishes to delegate only the manage-
ment of files in the boxes to someone, assign a user box administrator.
[Administrator Security
Levels]
From those items that are set up by the administrator, select levels at
which users are authorized to change settings.
[Security Details] Restricts functions that are related to authentication operations and data
management to enhance security.
[Enhanced Security Mode] Select whether to enable the Enhanced Security Mode.
If you enable the Enhanced Security Mode, the various security functions
are forcibly configured. This allows you to ensure higher-level security of
data management. For details, contact your service representative.
[HDD Settings] Manages the hard disk of this machine. Prevents the leakage of personal
and corporate information by protecting data in the hard disk against eras-
ure and protecting the hard disk with a password and encryption.
[Function Management
Settings]
Select whether to use network functions that are difficult to count.
[Stamp Settings] Select whether to force application of stamps to original data when printing
and sending a fax. It is also used to delete registered stamps.
[Driver Password Encryp-
tion Setting]
Used to change the encryption passphrase to encrypt authentication pass-
words (such as user and account passwords) when printing data using a
printer driver.
The same encryption passphrase must be set for the machine and the
printer driver.
[FIPS Settings] Select whether to enable the FIPS (Federal Information Processing Stand-
ardization) Mode.
FIPS defines security requirements for cryptographic modules. These
standards are adopted by many organizations, including U.S. federal gov-
ernment agencies. Enabling the FIPS Mode makes the functions of the ma-
chine conform to the FIPS.
Settings Description
[Password Rules] Configure whether to enable the password rules. Once you enable it, the
number of characters and text types that are available for passwords are
restricted. If necessary, change the minimum number of password charac-
ters.
For details on settings, refer to "User's Guide [Copy Operations]/[Descrip-
tion of Setup Buttons (Administrator Settings)]".
To Next Page
Loading...
Need help?
General
