How To Send a Fax 3-20
3.6 Option Settings for Fax TX
3
Scanning an original thinner than normal paper ([Thin Paper Original])
Reduce the original feed speed of the ADF to prevent thin paper from getting caught.
For details, refer to page 9-11.
Scanning a folded original ([Z-Folded Original])
Even the original sizes of folded originals can be detected accurately.
If a folded original is loaded into ADF, the original size may not be able be detected accurately. To scan a
folded original through the ADF, use [Z-Folded Original].
For details, refer to page 9-11.
NOTICE
Unfold folded originals before loading them into the ADF. If a folded original is not unfolded before scanning,
a paper jam may occur or the size may not be correctly detected.
Scanning a long original ([Long Original])
Load the long original on the ADF if it cannot be placed on the Original Glass and is larger in the feeding
direction than full standard size (A3 or 11 e 17). There is no need to enter the original size in advance: the
ADF will detect the size automatically.
For details, refer to page 9-12.
To Next Page
Loading...
Need help?
General
