Muratec MFX-C2280 Fax Guide

Sending Options 4-8
4.4 Sending a Fax at a Preset Time
4
Operation flow
1 Load the original.
2 Tap [Scan/Fax].
3 Specify the destination.
% You can specify multiple destinations at the same time.
4 Tap [Application] - [Fax Setting] - [Timer TX], then tap [ON].
5 Using the Keypad, enter the transmission start time, then tap [OK].
6 Press the Start key.
Scanning of the original starts. The fax is automatically sent at the specified time.
Tips
- If the machine power is not activated at the start time, fax transmission will not start. The fax transmis-
sion starts just after the machine power is turned on.

Muratec MFX-C2280 Specifications

General

Brand	Muratec
Model	MFX-C2280
Category	Copier
Language	English