Muratec MFX-C2280 Fax Guide

Sending Options 4-20
4.13 Sending a Fax with a Password ([Password TX])
4
4.13 Sending a Fax with a Password ([Password TX])
Password TX
The Password TX is a function that sends a fax with a password. It is used to send faxes to a device on which
fax peers are restricted by passwords (a device with Closed Network RX enabled).
Tips
- You can only use this function to communicate with our models supporting the closed network recep-
tion (password) function.
- You need to check the recipient's closed network reception password beforehand.
- This function cannot be used together with the following functions:
– Relay Distribution, Confidential Communication, Polling TX, Polling TX (Bulletin Board), Polling RX, Poll-
ing RX (Bulletin Board).
d Reference
This machine can restrict fax destinations using the Closed Network RX function. For details on the Closed
Network RX function, refer to page 6-10.
Operation flow
1 Load the original.
2 Tap [Scan/Fax].
3 Specify the destination.
4 Tap [Application] - [Fax Setting] - [Password TX], then tap [ON].
5 Using the Keypad, enter the Closed Network RX password of the destination, then tap [OK].
6 Press the Start key.
Transmission begins.

Muratec MFX-C2280 Specifications

General

Brand	Muratec
Model	MFX-C2280
Category	Copier
Language	English