Description of Setup Buttons 9-22
9
[Save & Print]
To display: [Scan/Fax] - [Application] - [App] - [Save & Print]
You can print data at the same time as you are using Scan or Fax TX.
[Fax Header Settings]
To display: [Scan/Fax] - [Application] - [App] - [Fax Header Settings]
Normally, the default sender name is added. However, you can use different sender names depending as
necessary.
If you want to use a sender name that is different from the default name, select a new sender name you want
to use, then tap [OK].
Related setting (for the administrator)
- By registering multiple sender names, you can use different sender names depending on the destina-
tion. For details on how to register, refer to page 11-16.
Settings Description
[ON]/[OFF] Select [ON] to send and print at the same time.
[No. of Sets] If necessary, enter the number of copies to print.
[Simplex/Duplex] Select [2-Sided] to print on both sides of sheets of paper.
[Staple] Select the binding positions for stapling the sheets.
• [Corner]: Each set of printed sheets is stapled in a corner (top left or top
right) before it is output.
• [2 Position]: Each set of printed sheets is stapled at two positions (in the
top, left, or right) before it is output.
• [Position Setting]: Select the binding position. If [Auto] is specified for
the binding position, the binding position is determined automatically.
To Next Page
Loading...
Need help?
General
