Description of Setup Buttons 9-20
9
[Header/Footer]
To display: [Scan/Fax] - [Application] - [Stamp/Composition] - [Header/Footer]
Add the date and time and any other required text in the top and bottom margins (header/footer) of the spec-
ified page. You must register the information to be added for header and footer in advance on this machine.
Related setting (for the administrator)
- For details on how to register the information to be added for header and footer, refer to page 11-9.
[TX Stamp]
To display: [Scan/Fax] - [Application] - [Stamp/Composition] - [TX Stamp]
When scanning originals using ADF, a TX Stamp is printed on a scanned original to certify that the original
has been scanned. It is used when sending a fax.
Tips
- To print TX Stamps, the Fax TX Stamp Unit is required.
- The ink used for stamping is consumables. If the ink becomes faint, contact your service representative.
- If [Mixed Original] is specified to scan originals, TX Stamp may not be printed on the specified position.
Settings Description
[ON]/[OFF] Select [ON] to print the header/footer.
[Recall Header/Footer] Select the header/footer to be printed. Select the header/footer from those
registered in advance.
[Check/Change Temporar-
ily]
If necessary, check or temporarily change the details of the program which
is selected in [Recall Header/Footer].
• [Header Settings]: Change the content of header.
• [Footer Settings]: Change the content of footer.
• [Pages]: Change the range of pages to print.
• [Text Details]: Change the print size, font, and text color.
To Next Page
Loading...
Need help?
General
