How To Send a Fax 3-23
3.6 Option Settings for Fax TX
3
4 Load the next original, then press the Start key.
% Press [Change Setting] to change the option settings according to the new original as necessary.
5 Repeat Step 4 until all pages of the original are scanned.
6 After all originals are scanned, tap [Finish] and press the Start key.
Sending starts.
Related setting
- You can select whether to scan originals continuously at all times even though [Separate Scan] is not
specified when scanning originals using the Original Glass (Default: [No]). For details, refer to
page 10-7.
3.6.3 Adjusting the Image Quality or Density (Application Settings)
Selecting the appropriate image quality for the contents of the original
([Original Type])
Select the appropriate type according to the contents of the original in order to scan it with optimal level of
image quality.
For details, refer to page 9-16.
To Next Page
Loading...
Need help?
General
