How To Send a Fax 3-26
3.6 Option Settings for Fax TX
3
Adding the header/footer ([Header/Footer])
Add the date and time and any other required text in the top and bottom margins (header/footer) of the spec-
ified page. You must register the information to be added for header and footer in advance on this machine.
For details, refer to page 9-20.
Related setting (for the administrator)
- For details on how to register the information to be added for header and footer, refer to page 11-9.
- You can select whether to cancel the settings for [Header/Footer] (Default: [Cancel]) when sending a
fax. For details, refer to page 11-10.
Printing a TX Stamp on scanned originals
When scanning originals using ADF, a TX Stamp is printed on a scanned original to certify that the original
has been scanned.
For details, refer to page 9-20.
NOTICE
Avoid using this function for originals that must be kept clean.
Tips
- To print TX Stamps, the Stamp Unit is required.
- If TX Stamp is enabled, the Quick Memory TX function is disabled.
- The ink used for stamping is consumables. If the ink becomes faint, contact your service representative.
To Next Page
Loading...
Need help?
General
