Description of Setup Buttons 9-24
9
Tips
- Generally, a fax is sent after all pages are scanned and saved in memory (Memory TX).
- You cannot specify both Quick Memory TX and [Fax Header Settings] at the same time.
[Polling TX]
To display: [Scan/Fax] - [Application] - [Fax Setting] - [Polling TX]
Use the Polling TX function to register files for polling with a Polling TX User Box of this machine.
d Reference
They can be used depending on the intended use. To use a Bulletin User Box, it must be created in advance.
For details on the registration procedure, refer to "User's Guide [Box Operations]/[Store File for Polling (Bul-
letin)]".
Settings Description
[ON]/[OFF] Select [ON] to specify Quick Memory TX.
[Number of Pages] If you want to show the total number of pages in the relevant column in the
sender information, select this option and enter the number of pages. With
this information, the destination can see the remaining number of pages to
be received.
Settings Description
[ON]/[OFF] Select [ON] to specify Polling TX.
[Normal] Select this option to register a file for polling in the Polling TX User Box.
The Polling TX User Box can have only one file.
[Bulletin] Select this option to register a file for polling in the Bulletin Board User Box.
Enter the registration number of the Bulletin Board User Box you want to
create using the Keypad.
The Bulletin Board User Box can have only one file. You can create up to
10 Bulletin Board User Boxes.
To Next Page
Loading...
Need help?
General
