Muratec MFX-C2280 Fax Guide

Sending Options 4-15
4.8 Sending a Fax Using an Additional Line ([Select Line])
4
Operation flow
1 Load the original.
2 Tap [Scan/Fax].
3 Specify the destination.
4 Tap [Application] - [Fax Setting] - [Line Setting].
5 Select a line used for transmission in [Select Line], then tap [OK].
% If [No Selection] is selected, an idle line is used. If both lines are idle, Line 1 takes precedence.
6 Press the Start key.
Transmission begins.

Muratec MFX-C2280 Specifications

General

Brand	Muratec
Model	MFX-C2280
Category	Copier
Language	English