Description of Setup Buttons (User Settings) 10-7
10
[0] is specified by default.
[Separate Scan from Platen]
To display: [Utility] - [User Settings] - [System Settings] - [Separate Scan from Platen]
Select whether to scan originals continuously at all times even though [Separate Scan] is not specified when
scanning originals using the Original Glass.
[No] is specified by default.
[Custom Display Settings]
To display: [Utility] - [User Settings] - [Custom Display Settings]
Change the Touch Panel display to the convenience of the user.
[Scan/Fax Settings] ([Custom Display Settings])
To display: [Utility] - [User Settings] - [Custom Display Settings] - [Scan/Fax Settings]
Change the default main screen in the fax/scan mode.
Settings Description
[Copier Settings] Change the default main screen in the copy mode.
For details on settings, refer to "User's Guide [Copy Operations]/[Descrip-
tion of Setup Buttons (User Settings)]".
[Scan/Fax Settings] Change the default main screen in the fax/scan mode.
For details on settings, refer to page 10-7.
[User Box Settings] Change the default main screen in the user box mode.
For details on settings, refer to "User's Guide [Box Operations]/[Descrip-
tion of Setup Buttons (User Settings)]".
[Function Display
Key(Copy/Print)]
Change the function key to be displayed in the main screen in the copy
mode and the print settings screen in the User Box mode.
For details on settings, refer to "User's Guide [Copy Operations]/[Descrip-
tion of Setup Buttons (User Settings)]".
[Function Display
Key(Send/Save)]
Change the function key to be displayed in the main screen in the fax/scan
mode and the send and save setting screens in the User Box mode.
For details on settings, refer to page 10-9.
[Copy Screen] Configure settings for the screen displayed in copy operations.
For details on settings, refer to "User's Guide [Copy Operations]/[Descrip-
tion of Setup Buttons (User Settings)]".
[FAX Active Screen] Select whether to display the screen indicating the machine status during
fax transmission.
For details on settings, refer to page 10-10.
[Search Option Settings] Configure the contents of the search screen when performing an detail
search for registered destinations.
For details on settings, refer to page 10-10.
Settings Description
[Default Tab] Select the main screen of the fax/scan mode from [Address Search/LDAP
Search], [Job History], [Address Book], and [Direct Input].
For details on settings, refer to page 10-8.
[Program Default] Select a page to be displayed on the main screen of [Program].
For details on settings, refer to page 10-9.
[Address Book Index De-
fault]
Select the index and destination type that are initially shown when [Ad-
dress Book] is displayed.
For details on settings, refer to page 10-9.
[Default Address Sort
Method]
Select the list order of destinations to be displayed in [Address Book] be-
tween registration number and registration name.
For details on settings, refer to page 10-9.
[Default Address Display
Method]
Select the display in [Address Book] between button and list.
For details on settings, refer to page 10-9.
To Next Page
Loading...
Need help?
General
