Muratec MFX-C2280 Fax Guide

Sending Options 4-19
4.12 Faxing Overseas ([Overseas TX])
4
4.12 Faxing Overseas ([Overseas TX])
Overseas TX
The Overseas TX Mode function reduces the transmission speed (the information transfer speed) for sending
a fax.
It is useful when sending a fax to areas where communication conditions are poor.
Tips
- When registering destinations with an address book, you can specify whether to send faxes in the Over-
seas TX mode in addition to registering fax numbers.
- This function cannot be used together with the following functions:
– Polling TX, Polling TX (Bulletin Board), Polling RX, Polling RX (Bulletin Board).
Operation flow
1 Load the original.
2 Tap [Scan/Fax].
3 Specify the destination.
4 Tap [Application] - [Fax Setting] - [Line Setting].
5 Select [Overseas TX], then tap [OK].
6 Press the Start key.
Transmission begins.

Muratec MFX-C2280 Specifications

General

Brand	Muratec
Model	MFX-C2280
Category	Copier
Language	English