Description of Setup Buttons (Administrator Settings) 11-8
11
[Registering and Changing Addresses]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Restrict User Access] - [Restrict Access to
Job Settings] - [Registering and Changing Addresses]
Select whether to allow the user to register or change destinations.
[Allow] is specified by default.
[Restrict Operation]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Restrict User Access] - [Restrict Operation]
Specify items for which access is restricted.
[Reset Settings]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Reset Settings]
Select whether to reset the functions and settings that are currently displayed when this machine has not
been operated for a certain period of time.
[Job Reset]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Reset Settings] - [Job Reset]
[Change the "From" Ad-
dress]
Select whether to allow the user to change the From address of the E-mail
sender.
For details on settings, refer to "User's Guide [Copy Operations]/[Descrip-
tion of Setup Buttons (Administrator Settings)]".
[Change Registered Over-
lay]
Select whether to allow the user to overwrite or delete a registered overlay
image.
For details on settings, refer to "User's Guide [Copy Operations]/[Descrip-
tion of Setup Buttons (Administrator Settings)]".
[Biometric/IC Card Info.
Registration]
Select whether to allow the user to register or delete user's biometric or
Card authentication information.
For details on settings, refer to "User's Guide [Copy Operations]/[Descrip-
tion of Setup Buttons (Administrator Settings)]".
[Synchronize User Authen-
tication & Account Track]
Select whether to allow users to change the settings for synchronizing user
authentication and account track when user authentication and account
track are enabled.
For details on settings, refer to "User's Guide [Copy Operations]/[Descrip-
tion of Setup Buttons (Administrator Settings)]".
Settings Description
Settings Description
[Restrict Broadcasting] Select whether to prohibit the user from sending faxes to multiple destina-
tions. To prohibit broadcast, select [ON].
[OFF] is specified by default.
Settings Description
[System Auto Reset] Select whether to reset all settings (except registered settings) when this
machine has not been operated for a certain period of time.
For details on settings, refer to "User's Guide [Copy Operations]/[Descrip-
tion of Setup Buttons (Administrator Settings)]".
[Auto Reset] Select whether to reset all settings (except registered settings) for each of
Copy, Fax/Scan, User Box functions when this machine has not been op-
erated for a certain period of time.
For details on settings, refer to "User's Guide [Copy Operations]/[Descrip-
tion of Setup Buttons (Administrator Settings)]".
[Job Reset] Select whether to reset settings for the conditions that are applied when
changing users or loading a document to the ADF.
For details on settings, refer to page 11-8.
To Next Page
Loading...
Need help?
General
