How To Send a Fax 3-3
3.1 Sending (Basic Operation Flow)
3
4 Configure the option settings for Fax TX as necessary.
% For details on configuring option settings, refer to the respective columns of the following table.
5 Press the Start key.
% Tap [Check Setting] before sending, and check the destination and settings as necessary.
% To redo operations for specifying destinations or option settings, press Reset.
Sending starts.
% Press Stop while the original is being scanned to stop scanning and view a list of inactive jobs. To
redo scanning of the original, delete the job from the list of inactive jobs.
Tips
- Header Position is automatically added to a fax to be sent.
Related setting
- You can change the defaults for optional settings for fax transmission according to the operating envi-
ronment. For details, refer to page 10-11.
d Reference
You can register multiple sender names and use different sender names depending on the destination. For
details, refer to page 4-2.
Purpose Tips
To configure basic options such as original size and resolution page 3-19
To configure options to scan various types of originals such as various sizes
and books
page 3-19
To adjust the image quality level of the original such as colored background
(newspaper, etc.) or light printing original
page 3-23
To print date/time and page number page 3-24
Other option settings page 3-27
To Next Page
Loading...
Need help?
General
