Section 75 00-02-0878
2013-03-07 - 4 -
Introduction
This Operator's Manual includes general product information, display readings, push-
button, LED functions, alarm handling descriptions, and presentation of the log list. This
manual is intended to help optimize the operator s daily use. On the basis of this
document, the operator will be able to carry out simple procedures such as start/stop
and control of the generator set.
As a Reference point: Please note that the "U" symbol is also used as an
indication for the voltage.
EMS-GC10 delivers field-adjustable operating parameters but may require further
configuration using the Utility Software. It can support both mechanical and J1939
electronic engines.
The EMS-GC10 is ideal for use with a remote modem or in a SCADA system offering
Modbus® RTU protocol on the RS485 port.
Product Description
The EMS-GC10 Genset Controller provides flexible control and monitoring for industrial
genset applications. Typical applications include backup power, power supply for
remote locations without a connection to power grid, and mobile power for remote
locations. The controller supports programmable logic, up to 40 expressions, and can
be configured for specific predefined functions unique to your application.
The EMS-GC10 supports Automatic Mains Failure (AMF) and generator breaker
control.
The EMS-GC10 offers field-adjustable operating parameters that can be changed
through the controller or an easy to use PC configuration tool called Utility Software
To Next Page
Loading...
