Section 75 00-02-0878
2013-03-07 - 153 -
JDEC – John Deere Engines
Alarm, status and measurement table (read-only) function code 04h.
Addr. Content Type
1020 EIC alarms
Bit 0 7570 EIC communication error
Bit 1 7580 EIC warning
Bit 2 7590 EIC shutdown
Bit 3 7600 EIC overspeed
Bit 4 7610 EIC coolant water temperature 1
Bit 5 7620 EIC coolant water temperature 2
Bit 6 7630 EIC oil pressure 1
Bit 7 7640 EIC oil pressure 2
Bit 8 7650 EIC oil temp. 1
Bit 9 7660 EIC oil temp. 2
Bit 10 7670 EIC coolant level 1
Bit 11 7680 EIC coolant level 2
1024 EIC alarms, engine controller (DM1)
Bit 0 EIC high coolant temperature, shutdown
Bit 1 EIC low oil pressure, shutdown
Bit 2 EIC fuel temperature, shutdown
Bit 3 EIC fuel control valve, shutdown
Bit 4 EIC ECU failure, shutdown
Bit 5 EIC oil pressure, warning
Bit 6 EIC intake manifold, warning
Bit 7 EIC coolant temperature, warning
Bit 8 EIC fuel injection pump, warning
Bit 9 EIC JDEC shutdown (LS: lamp status)
Bit 10 EIC JDEC warning (LS: lamp status)
Bit 11 EIC communication error
Bit 12 EIC protection
Bit 13 EIC malfunction
To Next Page
Loading...
