Troubleshooting VJ-1324 OPERATION MANUAL
252 7.1 Malfunctions and failures
(5) Printing lines are not straight
(6) Printing lines are duplicated or patchy
4 Did you perform Alignment? Perform Alignment.
3.6 Adjust
Print
5 Did you perform Media feed compensation? Perform Media feed compensation.
4.2.6 Media
feed
compensation
6 Is the temperature setting of each heater
appropriate?
Set the temperature appropriately.
5.1.1.1.5 Pre-
heater menu to
5.1.1.1.7 Dryer
menu
7 Is the head height set to High? Return the head height to "Low".
4.2.5 Head
height adjustment
No. Possible cause Remedy Reference
1 Is the ink cartridge within the validity period? Use a new ink cartridge.
6.1.1
Replacing ink
cartridges
2 Are you using the recommended media? Use the recommended media.
4.2.1 Media
type
3 Did you perform Alignment? Perform Alignment.
3.6 Adjust
Print
4 Did you perform Media feed compensation? Perform Media feed compensation.
4.2.6 Media
feed
compensation
No. Possible cause Remedy Reference
1 Is the nozzle in good condition? Perform Head cleaning.
6.2.3 Head
cleaning
2 Is the head height set to High? Return the head height to "Low".
4.2.5 Head
height adjustment
No. Possible cause Remedy Reference
To Next Page
Loading...
Need help?
General