MUTOH XPJ-461UF - Page 116

116 Preparing for Daily Maintenance
Entering to sleep mode
[1]
Tap [Home].
[2]
• Use to choose the menu shown left.
•Tap .
[3]
Tap .
[4]
Tap [Enter].
[5]
Tap [Enter].
[6]
The message on the left will appear.
• Remove the media and the jig on the table, and then tap [Enter].
• The table, carriage and cleaning wiper move to gain access to daily
maintenance.
[7]
The message on the left will appear.
• You can start maintenance.
Important!
Make sure to complete this maintenance within 5 minutes while the printer is in Daily maintenance state.
Menu5
SleepMode
SleepMode1
Start
SleepMode
Start   ー＞ Enter
DailyMaintenance
Start   ー＞ Enter
UnloadMedia
thenTapEnter
PleaseWait
DailyMaintenance
End   ー＞ Enter