Head cleaning 123
3 Printer Maintenance
When nozzle clogging is found in nozzle check, conduct head cleaning. Head cleaning consumes ink.
There are several cleaning modes in this product. Please select an appropriate mode based on your usage condition.
Important!
Comply strictly with the following when you performing “Little Charge” or “Initial Charge”. If charging is interrupted, ink will be
lost when charging is resumed.
• Do not open the Front cover or the PG handle cover.
• Do not use ink cartridges that have little ink remaining.
Head cleaning
Short cleaning Consumes less ink than Normal cleaning.
Normal cleaning Perform Normal cleaning if nozzle clogging is found on the nozzle check print.
Long cleaning Perform Long cleaning if nozzle clogging still persists after performing Normal cleaning.
It consumes more ink than Normal cleaning.
Little Charge Provide higher cleaning effect than Long cleaning, but it also consumes more ink.
*This mode cannot be selected via the . Select it from the Cleaning submenu in the Panel
Setting Menus.
"Maitenance1: Cleaning" P. 90
Initial Charge Provide higher cleaning effect than Little Charge, but it also consumes more ink.
*This mode cannot be selected via the . Select it from the Cleaning submenu in the Panel
Setting Menus.
"Maitenance1: Cleaning" P. 90
To Next Page
Loading...
