MUTOH XPJ-461UF - Replacing UV-LED Lamp Filter

Replacing UV-LED Lamp Filter 137
The UV-LED lamp filter protects the lamp from ink mist. Using the printer with dirty filter will cause damage to the UL-LED lamp.
Replacing period:
• Once a month or when the filter gets dirty by dust or ink.
(since it differs depending on usage frequency, please check periodically)
Replacing UV-LED Lamp Filter
Skin or eye contact with UV curable ink may cause skin inflammation or allergic reaction.
When using this product, wear personal protective equipment (supplied gloves or solvent-resistant
gloves, goggles or protective eyewear, protective mask, protective clothing) to avoid skin contact
with ink.
Replacing steps
[1]
Check that the media and jig are removed from the printer.
[2]
Tap [Home].
[3]
• Use to choose the menu shown left.
•Tap .
[4]
• Use to choose the menu shown left.
•Tap .
[5]
Tap [Enter].
• The carriage will move to the left side of the printer.
• The cleaning wiper will move upward.
The message on the left will appear.
CAUTION
Menu3
Maintenance
Maintenance3
CRMaintenance
CRMaintenance
Start   ー＞ Enter
CRMaintenance
End   ー＞ Enter