138 Replacing UV-LED Lamp Filter
[6]
Hold the handle on the front cover to gently open it.
[7]
Push the table all the way
[8]
While supporting the UV-LED lamp with one hand, remove the filter from the lamp.
[9]
Replace with the new filter.
• Firmly insert it into the filter slot.
[10]
Move the table to the front by hand.
[11]
Hold the position shown on the left and gently close the cover.
[12]
Tap [Enter].
• The message on the left will appear.
• That ends the procedure.
CRMaintenance
End ー> Enter
CRMaintenance
Start ー> Enter