Carriage
Contains the print head,
the LED pointer and
UV-LED unit.
UV-LED unit
Unit that emits the UV
(ultraviolet) light to cure
the ink.
Operation panel
Table
The media is printed on
this. Its height can be
altered by turning the PG
handwheel.
Itcanberemovedtoinstall
theoptionalvacuumtable
withvacuumfan.
LED pointer
Used for setting the origin
point position or for
checking the printing area.
Obstacle sensor
Sensor for making sure
the media does not
contact the print head.
PG handwheel
Turning the handwheel
inside here raises/lowers
the table.
Front cover
Open when mounting
media or during
maintenance.
To Next Page
Loading...
