MUTOH XPJ-461UF - Setup 4: Initialization

86 Setup 4: Initialization
Initial Settings 6: Gateway
Sets the gateway.
• Use to increase a setting value.
• Use to decrease a setting value.
• Tap [Enter] to confirm your input for a value. The cursor will move on to the
next setting value.
Confirm your input for each value.
Setting values
0.0.0.0 to <192.168.1.254> to
255.255.255.255
<> indicates the default setting.
Initial Settings 7: Alert Buzzer
Selects how to turn off the printer beep sound when an error occurs.
• For unattended printing, you can select “Off” setting to avoid continuous
buzzer beep.
Setting values
After several beeps, the printer
automatically turns off beep sound.
Press any key on Operation panel to turn
off beep sound.
This is the default setting.
Setup 4: Initialization
Restore the settings of the printer to factory default.
Submenus
Initialize the User Type settings (Type1 to
Type10) in all the submenus of the
"Set1:
User Type"
.
Initialize the settings in all the submenus
of the
"Set2: Advanced".
Initialize the settings in all the submenus
of the
"Set up3: Initial Settings".
Initialize the settings of all the menus.
InitialSettings6
Gateway
Gateway：
 192.168.1.254
InitialSettings7
AlertBuzzer
AlertBuzzer：
Off
AlertBuzzer：
On
Setup4
Initialization
Initialization1
UserTypeALL
Initialization2
AdvancedSettings
Initialization3
InitialSettings
Initialization4
ALL