How to perform initial ink charging after ink discharge 145
[6]
Make sure you agitate the ink cartridge after you unpack it.
• Turn the ink plug upward and wait for three seconds.
• Next, turn the ink plug downward and wait for three seconds.
• Repeat that 10 times.
Note
• You do not have to agitate varnish ink before use.
[7]
Insert ink cartridge to this product.
• Match the label of this product to the color of ink cartridge.
• The arrow on the cartridge should face up.
• Insert each cartridge to firmly seat it into each slot.
The message on the left will appear.
• This printer starts ink charging.
DO NOT attempt the following actions during ink charging:
• Power off the printer.
• Disconnect the power cord.
• Open the front cover and PG handle cover.
When ink charging is complete, the message on the left will appear.
Setmedia,then
Tap[∧]key.