List of specifications 159
Environmental
conditions
Operation environment Temperature 20 to 32 °C, humidity 40 to 60%,
no condensation.
Recommended Printing
Environment
Temperature 22 to 32 °C, humidity 40 to 60%,
no condensation.
Change rate Temperature: No more than 2 °C per 1 hour
Humidity: No more than 5% per 1 hour
Environment for storage Storage without ink charging: up to 6 months
Temperature -20 to +60 °C, humidity 20 to 80%
Storage with ink charging: up to 30 days *
1
*
2
Temperature 5to +30 °C, humidity 20 to 80%
*
1
Perform the "Daily Maintenance" P. 114 in the operation
manual.
*
2
Always leave the printer in sleep mode and check the
remaining ink level once a week.
Agitate white ink in the cartridge once a week as instructed.
Ink Storage Environment · UH21 ink
Black/Cyan/Magenta/Yellow/White/Varnish
(220 ml each)
Temperature -10 to 50 °C (The storage period between 40 °C
and 50 °C should be up to one month)
Humidity: 5 to 85%, No condensation
· US11 ink
Black/Cyan/Magenta/Yellow/White/Varnish
(220 ml each)
Temperature 5 to 35 °C
Humidity: No condensation
· Cleaning cartridge (220 ml) (both UH21 and US11 inks)
Temperature -10 to 50 °C (The storage period between 40 °C
and 50 °C should be up to one month)
Humidity: 5 to 85%, No condensation
Power supply
specifications
Voltage AC 100 V - 240 V ±10%
Frequency 50/ 60Hz ±1Hz
Capacity No less than 4 A
Power consumption Standby mode 20 W maximum
Ready to print 40 W maximum
Operation 195 W maximum
Power consumption
*With optional vacuum
table installed
Standby mode AC 100 V - 240 V: 20 W maximum
Ready to print AC 100 V - 240 V: 110 W maximum
Operation AC 100 V - 240 V: 250 W maximum
Current consumption 100 V - 120 V 3.0 A maximum
200 V - 240 V 1.5 A maximum
External dimensions Height 597 mm
Width 1,188 mm
Depth 972 mm
Weight Main body 95 kg
To Next Page
Loading...
